Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 10 Vise Block by Sinclair in US
Rifle Bench & Vise Blocks by Sinclair in US
|
Item technical details: The sinclair vise block is the perfect tool for securely holding your ar-15/ar-10 in a bench vise. The vise block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The vise block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. Ar-10 model only fits armalite ar-10 pattern rifles, does not fit dpms/sr25 pattern rifles. Mfg: sinclair international. Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 10 Vise Block, dependable & durable rifle bench & vise blocks by Sinclair, MPN 23150. Distributor item Nr: 749003696-749002689-11266.
 Indicative Price: USD 26.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more US specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Ar 15/M16 Lower Receiver Vise Block by Brownells in US
USD 49.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won't be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Fits tightly in mos mfg: brownells specs: high-density urethane plastic, black. 5" (12cm) high, 2βό" (5.7cm) wide, βύ" (19cm) thick. Brownells Ar 15/M16 Lower Receiver Vise Block, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-000-662. Distributor item Nr: 080000662-702004015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Mauser Receiver Holding Fixture Mauser Receiver Fixture by Brownells in US
USD 89.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Provides complete access to these hard-to-hold receivers, without the worry of crushing or damage. Securely holds mauser receivers and barreled actions in a bench vise, drill press or milling machine when drilling and tapping for scope bases, polishing, bolt lapping, milling or other modifications. The receiver is rigidly clamped to the fixture using a plate inside the frame rails and/or the stock mounting screws. Fits military and commercial m98 actions. Mfg: brownells specs: steel, blued. 9" (22.8cm) long, 1" (2.5cm) wide. Includes clamp plate and bolt. Brownells Mauser Receiver Holding Fixture Mauser Receiver Fixture, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-919-000. Distributor item Nr: 080919000-080919000-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Upper Receiver Action Block & Lower Vise Block Set by Brownells in US
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the ar-15/m16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, n mfg: brownells specs: injection-molded rynite, black. Fits a1, a2, and standard flattop receivers. Block, 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert, 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. Lbs. Brownells Ar 15/M16 Upper Receiver Action Block & Lower Vise Block Set, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-000-659. Distributor item Nr: 080000659-702003015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 308 Ar Lower Receiver Vise Block Ar Style .308 Lower Receiver Block by Brownells in US
USD 45.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Heavy-duty vise block takes all the clamping force, so your expensive lower receiver won't get scratched, distorted, or otherwise damaged. Insert block into the mag well, just like an ordinary magazine, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Double-ended design fits armalite ar-10, bushmaster .308, dpms panther lr-308, and remington r-25. Does not fit rock river arms lower receivers. Machined from rugged, durable, chemical-resistant delrin polymer; will not mar or scratch weapon's finish. Mfg: brownells specs: machined delrin, white. 5-1/8" (13cm) high, 3" (7.6cm) wide, 1" (2.5cm) thick. Fits most ar-style .308 rifles except rock river arms. Brownells 308 Ar Lower Receiver Vise Block Ar Style .308 Lower Receiver Block, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-000-494. Distributor item Nr: 080000494-080000494-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Tapco Weapons Accessories Sks Vise Block by Tapco in US
USD 11.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Keep your sks secure with the tapco magazine vise block. This block, made from a durable composite, locks into the mag well of the sks just as a magazine would. The block can then be inserted into a vise and locked into place, keeping your sks secure while you work on it. The block features a compact design and hang hole for your peg board for easy storage. Mfg: tapco weapons accessories. Tapco Weapons Accessories Sks Vise Block, dependable & durable rifle bench & vise blocks by Tapco, MPN 16797. Distributor item Nr: 100017640-100017640-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Magpul Ar 15 Bev Block Ar15/M4 by Magpul in US
USD 47.45
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: The bev block (barrel extension vise) is an all-in-one, compact vise block tool for ar assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and magpul polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability adn included pin keeps upper in proper position. The bev can also be turned over and used as a mag well vise block to support t mfg: magpul. Magpul Ar 15 Bev Block Ar15/M4, dependable & durable rifle bench & vise blocks by Magpul, MPN MAG536. Distributor item Nr: 100015280-100015280-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips 308 Ar morers Block by Ergo in US
USD 21.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: This is one of the most useful maintenance accessories available for an ar-10. Simply bolt or clamp securely to a bench or other work surface, place an ar 308 rifle onto the block inside the magazine well, and the rifle is held in place for cleaning, maintenance, or storage. 1-piece glass filled polymer design fits rifles that use sr-25 pattern magazines weight: .7oz 6-1/8" tall x 2" long(at the base) x 4-1/4" wide (at the base) 1/4" mounting holes mfg: ergo grips. Ergo Grips 308 Ar morers Block, dependable & durable rifle bench & vise blocks by Ergo, MPN 4989. Distributor item Nr: 573000088-573000088-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Upper Receiver Action Block by Brownells in US
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the ar-15/m16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, n mfg: brownells specs: injection-molded rynite, black. Fits a1, a2, and standard flattop receivers. Block, 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert, 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. Lbs. Brownells Ar 15/M16 Upper Receiver Action Block, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-000-661. Distributor item Nr: 080000661-702003015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Plastix Plus Ar 15/M16 Display Stands Wall Mount Display Stand by Plastix in US
USD 42.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: High-density, thermoplastic-welded polyethylene stands securely hold your ar-15 for display or cleaning and maintenance chores. Each stand has a 7" post with beveled edges that fits in the magwell like a magazine. Barrel support model features a wide display stand with enclosed tray and a barrel support at one end. Parts tray model has a centered resting post and no barrel support with plenty of room in the tray to keep small parts from straying. Wall-mount model keeps your weapon off the ground and includes a holder for one magazine. Mfg: plastix plus llc specs: high-density, thermoplastic-welded polyethylene, black. Barrel support/parts tray 18" (45.7cm) long, 6β½" (16.5cm) wide, 7βό" (18.4cm) high. Wall-mount 7βό" (18.4cm) long, 4β½" (11.4cm) wide, 6" (15.2cm) high. Plastix Plus Ar 15/M16 Display Stands Wall Mount Display Stand, dependable & durable rifle bench & vise blocks by Plastix, MPN PPAR97. Distributor item Nr: 100005253-100005252-11266.
More Details : click here
SEARCH this site : click here
|
|
|
The Device Manufacturing Ar 15/M16 Upper Receiver Fixture Mk1mod0 Device by Device in US
USD 299.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Professional grade ar upper receiver fixture. Robust fixture designed for years of hard use. Quick, intuitive interface that allows rapid building/rebuilding and repair of the entire upper receiver of the ar15/m16/m4 family of rifles/carbines/pistols. Designed to allow all upper receiver parts to be installed or removed without interference. Designed with rail systems in mind, the device has clearance for most rail systems to allow installation and removal while the upper is securely held. Holds receiver from the inside via the bolt carrier raceway and charging handle raceway by way of a "t" interface. Front and rear lugs are controlled along with the entire bottom receiver flat mfg: the device manufacturing llc. The Device Manufacturing Ar 15/M16 Upper Receiver Fixture Mk1mod0 Device, dependable & durable rifle bench & vise blocks by Device, MPN MK1MOD0DEVICE. Distributor item Nr: 100022745-100022745-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Tangodown Armorer's Blocks Scar Armorer's Block Set by Tangodown in US
USD 181.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: High-density polymer blocks allow critical subassemblies of the sof command assault rifle (scar) to be tightly clamped in a vise without danger of crushing, twisting, or otherwise distorting them. Provides secure support for safe, effective cleaning, adjustment, maintenance, and repair without marring or scratching the finish. Available as a complete set or separate components. Upper receiver/barrel block surrounds the front sight/gas block to securely hold the barrel module while also protecting the exposed portion of the gas system leaving your upper free to be worked on. Lower receiver/trigger module block locks into the magazine well and absorbs all the clamping force to protect the s mfg: tangodown specs: high-density, injection-molded polymer. Tangodown Armorer's Blocks Scar Armorer's Block Set, dependable & durable rifle bench & vise blocks by Tangodown, MPN ABSFNSCAR001. Distributor item Nr: 100003431-100003431-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips Ar 15/M16 Spike's Block Ar 15 Spike's Block by Ergo in US
USD 25.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: One-piece, molded polymer stand securely supports the lower receiver for cleaning, maintenance or storage. Base has a small footprint and clamps to your workbench, while the top fits in the magwell of any ar-15 pattern rifle. Grooves in both sides of insert accept the mag catch to lock your rifle on the block. Can also be used as a wall mount for your rifle. Mfg: ergo grips specs: molded, glass-filled resin, black. 4-5/8" (11cm) long, 2" (5.1cm) wide, 6-1⁄8" (15.5cm) tall. 4.3 oz. (122g) wt. Permanent installation requires four βό" bolts or screws, not included. Assembly includes one block only. Ergo Grips Ar 15/M16 Spike's Block Ar 15 Spike's Block, dependable & durable rifle bench & vise blocks by Ergo, MPN 4996. Distributor item Nr: 573000063-573000063-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Ar 15/M4 Reaction Block (Mil Spec Buffer Tube Only) by Geissele in US
USD 87.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: The geissele reaction block is designed to aid in the assembly of lower receivers. Once the armorer has installed the buffer tube onto the lower; the buffer tube and lower receiver assembly can be slid into the reaction block at the 12, 3, 6 and 9 o'clock positions. This allows the armorer to rotate the lower in 90 degree increments in the block simply by loosening the provided nylon screws, removing the lower, and sliding it back in at the desired orientation. The reaction block provides an ultra-stable platform for performing an array of lower receiver operations, as well as making the installation of the buffer retainer nut quick and easy. All while keeping both hands of the armo mfg: geissele automatics llc. Geissele Automatics Ar 15/M4 Reaction Block (Mil Spec Buffer Tube Only), dependable & durable rifle bench & vise blocks by Geissele, MPN 5314. Distributor item Nr: 100016578-100016578-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Ar 15 Bolt Vise by Sinclair in US
USD 18.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Our bolt vise helps you disassemble your ar-15 bolt easily and without losing any parts. The main function of the tool is to compress the ejector so you can remove the spring pin easily. This enables you to release the pressure on the ejector slowly so the ejector and spring don't go flying off your workbench. The ejector and spring can be replaced if needed and the bolt reassembled easily. The tool cradles the bolt and holds it firmly in place while the screw assembly compresses the ejector. A hole in the vise allows the pin to drop free. The tool can also be used to hold the bolt securely while replacing gas rings and replacing the extractor. Note: we recommend you replace the ejecto mfg: sinclair international. Sinclair Ar 15 Bolt Vise, dependable & durable rifle bench & vise blocks by Sinclair, MPN 14950. Distributor item Nr: 749003708-749003708-11266.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Sinclair International Ar 15/Ar 10 Ar Vise Blocks Sinclair Ar 10 Vise Block by Sinclair in US
|
 Copyright © PrizeGunParts.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
