Brownells Ar 15/M16 Lower Receiver Vise Block Action Block & Lower Vise Block Set by Brownells in US
Rifle Bench & Vise Blocks by Brownells in US
|
Item technical details: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won't be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Fits tightly in mos mfg: brownells specs: high-density urethane plastic, black. 5" (12cm) high, 2βό" (5.7cm) wide, βύ" (19cm) thick. Brownells Ar 15/M16 Lower Receiver Vise Block Action Block & Lower Vise Block Set, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-000-659. Distributor item Nr: 080000659-702004015-11266.
 Indicative Price: USD 59.99
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more US specification gun & shooting products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Brownells Receiver Contouring Fixture by Brownells in US
USD 128.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Provides a precise base for machining surplus military receivers. Used with brownells receiver facing mandrels, the receiver rotates around its own axis for removing pits, unwanted markings and re-contouring front rings. Lets you remove the charger guide from mausers, clean up enfield rear bridges and other custom work. Ensures that the work is square to the receiver. Mfg: brownells specs: steel, blued. 13" (33cm) long, 3" (7.6cm) wide. Use with large ring and small ring mausers, p-14 and p-17 enfields, 03 springfield, rem. 700, win m-70. Click here for receiver facing mandrels. Brownells Receiver Contouring Fixture, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-914-000. Distributor item Nr: 080914000-080914000-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Ar 15/M16 Upper Receiver Action Block by Brownells in US
USD 59.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Heavy-duty blocks allow you to firmly clamp ar-15/m16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the ar-15/m16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, n mfg: brownells specs: injection-molded rynite, black. Fits a1, a2, and standard flattop receivers. Block, 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert, 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. Lbs. Brownells Ar 15/M16 Upper Receiver Action Block, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-000-661. Distributor item Nr: 080000661-702003015-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Tangodown Armorer's Blocks Scar Armorer's Block Set by Tangodown in US
USD 181.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: High-density polymer blocks allow critical subassemblies of the sof command assault rifle (scar) to be tightly clamped in a vise without danger of crushing, twisting, or otherwise distorting them. Provides secure support for safe, effective cleaning, adjustment, maintenance, and repair without marring or scratching the finish. Available as a complete set or separate components. Upper receiver/barrel block surrounds the front sight/gas block to securely hold the barrel module while also protecting the exposed portion of the gas system leaving your upper free to be worked on. Lower receiver/trigger module block locks into the magazine well and absorbs all the clamping force to protect the s mfg: tangodown specs: high-density, injection-molded polymer. Tangodown Armorer's Blocks Scar Armorer's Block Set, dependable & durable rifle bench & vise blocks by Tangodown, MPN ABSFNSCAR001. Distributor item Nr: 100003431-100003431-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Plastix Plus Ar 15/M16 Display Stands Wall Mount Display Stand by Plastix in US
USD 42.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: High-density, thermoplastic-welded polyethylene stands securely hold your ar-15 for display or cleaning and maintenance chores. Each stand has a 7" post with beveled edges that fits in the magwell like a magazine. Barrel support model features a wide display stand with enclosed tray and a barrel support at one end. Parts tray model has a centered resting post and no barrel support with plenty of room in the tray to keep small parts from straying. Wall-mount model keeps your weapon off the ground and includes a holder for one magazine. Mfg: plastix plus llc specs: high-density, thermoplastic-welded polyethylene, black. Barrel support/parts tray 18" (45.7cm) long, 6β½" (16.5cm) wide, 7βό" (18.4cm) high. Wall-mount 7βό" (18.4cm) long, 4β½" (11.4cm) wide, 6" (15.2cm) high. Plastix Plus Ar 15/M16 Display Stands Wall Mount Display Stand, dependable & durable rifle bench & vise blocks by Plastix, MPN PPAR97. Distributor item Nr: 100005253-100005252-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Dpms Ar 15 Upper Receiver Block Dpms .308 Upper Receiver Block by DPMS in US
USD 71.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard ar-15 and dpms ar-style .308 receivers. Mfg: dpms specs: nylon, white. Ar-15, 7" (17.8cm) long, 1" (4.5cm) wide, 2-7⁄8" (7.3cm) high. Dpms .308, 7-3⁄8" (18.7cm) long, 1-7⁄8" (4.8cm) wide, 3" (7.6cm) high. Fits dpms panther ar-style .308 receivers. Dpms Ar 15 Upper Receiver Block Dpms .308 Upper Receiver Block, dependable & durable rifle bench & vise blocks by DPMS, MPN F414637. Distributor item Nr: 231000240-231000157-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Daguanno Customs Ar 15 Receiver Raceway Fixture Ar 15/M16 Rrf by Daguanno in US
USD 122.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Unlike typical vice-block type tools, the d'aguanno custom receiver raceway fixture provides a precision fit inside the receiver raceway to accurately fit all forged and machined receivers cut to mil-spec bolt carrier dimensions. The receiver raceway fixture is designed to allow the user to use the fixture for multiple assembly operations. Use to torque the barrel nut on the receiver as well as the muzzle device to the barrel the slot in the locating pin allows the installation of the gas tube without removing the upper from the fixture. Works great for multiple task like installing the forward assist, handguards, dustcovers, optics, and other tactical acces mfg: daguanno customs. Daguanno Customs Ar 15 Receiver Raceway Fixture Ar 15/M16 Rrf, dependable & durable rifle bench & vise blocks by Daguanno, MPN RRF. Distributor item Nr: 100024699-100024699-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Ar 15 Bolt Vise by Sinclair in US
USD 18.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Our bolt vise helps you disassemble your ar-15 bolt easily and without losing any parts. The main function of the tool is to compress the ejector so you can remove the spring pin easily. This enables you to release the pressure on the ejector slowly so the ejector and spring don't go flying off your workbench. The ejector and spring can be replaced if needed and the bolt reassembled easily. The tool cradles the bolt and holds it firmly in place while the screw assembly compresses the ejector. A hole in the vise allows the pin to drop free. The tool can also be used to hold the bolt securely while replacing gas rings and replacing the extractor. Note: we recommend you replace the ejecto mfg: sinclair international. Sinclair Ar 15 Bolt Vise, dependable & durable rifle bench & vise blocks by Sinclair, MPN 14950. Distributor item Nr: 749003708-749003708-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells 308 Ar Lower Receiver Vise Block Ar Style .308 Lower Receiver Block by Brownells in US
USD 45.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Heavy-duty vise block takes all the clamping force, so your expensive lower receiver won't get scratched, distorted, or otherwise damaged. Insert block into the mag well, just like an ordinary magazine, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Double-ended design fits armalite ar-10, bushmaster .308, dpms panther lr-308, and remington r-25. Does not fit rock river arms lower receivers. Machined from rugged, durable, chemical-resistant delrin polymer; will not mar or scratch weapon's finish. Mfg: brownells specs: machined delrin, white. 5-1/8" (13cm) high, 3" (7.6cm) wide, 1" (2.5cm) thick. Fits most ar-style .308 rifles except rock river arms. Brownells 308 Ar Lower Receiver Vise Block Ar Style .308 Lower Receiver Block, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-000-494. Distributor item Nr: 080000494-080000494-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Sinclair Bench Block For Remington Bolts by Sinclair in US
USD 22.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: This bench block is specifically designed for use with sinclair bolt tools for remington bolt actions. This bench block secures both remington bolts and firing pins in the proper position for driving out pins. Machined from black delrin so it will not damage any external finishes and features a machined ""well"" properly located to prevent the loss of pins. Mfg: sinclair international. Sinclair Bench Block For Remington Bolts, dependable & durable rifle bench & vise blocks by Sinclair, MPN 22525. Distributor item Nr: 749002695-749002695-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Precision Reflex Ar 15/M16 Upper Receiver Vise Block by Precision in US
USD 57.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Heavy duty, machined aluminum vise block lets you clamp an ar-15/m16 upper receiver in a bench vise without risk of marring the finish or distorting the receiver from over-tightening. Dual-use design allows the receiver to be positioned top side up or, if it's a flattop, upside down; either way, the vise grasps the block and never touches the receiver. One side of the block fits in the underside of the receiver and is held securely in place with two, steel, t-pins inserted through the takedown pin holes, so you can install optics, perform thorough cleaning, and do other work on the exterior. Or, slide a flattop receiver rail into the grooves on the other side of the block and tighten t mfg: precision reflex, inc. Specs: body, aluminum, hardcoat anodized, matte black. 7" (17.8cm) long, 1βό" (3.2cm) wide, 1βό" high. Pins steel, black oxide finish. Fits ar-15/m16/m4 and clones with .250" diameter takedown pin holes. Precision Reflex Ar 15/M16 Upper Receiver Vise Block, dependable & durable rifle bench & vise blocks by Precision, MPN 50083. Distributor item Nr: 714000006-714000006-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Geissele Automatics Ar 15/M4 Reaction Block (Mil Spec Buffer Tube Only) by Geissele in US
USD 87.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: The geissele reaction block is designed to aid in the assembly of lower receivers. Once the armorer has installed the buffer tube onto the lower; the buffer tube and lower receiver assembly can be slid into the reaction block at the 12, 3, 6 and 9 o'clock positions. This allows the armorer to rotate the lower in 90 degree increments in the block simply by loosening the provided nylon screws, removing the lower, and sliding it back in at the desired orientation. The reaction block provides an ultra-stable platform for performing an array of lower receiver operations, as well as making the installation of the buffer retainer nut quick and easy. All while keeping both hands of the armo mfg: geissele automatics llc. Geissele Automatics Ar 15/M4 Reaction Block (Mil Spec Buffer Tube Only), dependable & durable rifle bench & vise blocks by Geissele, MPN 5314. Distributor item Nr: 100016578-100016578-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Ergo Grips Ar 15/M16 Spike's Block Ar 15 Spike's Block by Ergo in US
USD 25.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: One-piece, molded polymer stand securely supports the lower receiver for cleaning, maintenance or storage. Base has a small footprint and clamps to your workbench, while the top fits in the magwell of any ar-15 pattern rifle. Grooves in both sides of insert accept the mag catch to lock your rifle on the block. Can also be used as a wall mount for your rifle. Mfg: ergo grips specs: molded, glass-filled resin, black. 4-5/8" (11cm) long, 2" (5.1cm) wide, 6-1⁄8" (15.5cm) tall. 4.3 oz. (122g) wt. Permanent installation requires four βό" bolts or screws, not included. Assembly includes one block only. Ergo Grips Ar 15/M16 Spike's Block Ar 15 Spike's Block, dependable & durable rifle bench & vise blocks by Ergo, MPN 4996. Distributor item Nr: 573000063-573000063-11266.
More Details : click here
SEARCH this site : click here
|
|
|
Brownells Mauser Receiver Holding Fixture Mauser Receiver Fixture by Brownells in US
USD 89.99
(Indicative price - actual current price possibly lower)
Rifle Bench & Vise Blocks in US
Item technical details: Provides complete access to these hard-to-hold receivers, without the worry of crushing or damage. Securely holds mauser receivers and barreled actions in a bench vise, drill press or milling machine when drilling and tapping for scope bases, polishing, bolt lapping, milling or other modifications. The receiver is rigidly clamped to the fixture using a plate inside the frame rails and/or the stock mounting screws. Fits military and commercial m98 actions. Mfg: brownells specs: steel, blued. 9" (22.8cm) long, 1" (2.5cm) wide. Includes clamp plate and bolt. Brownells Mauser Receiver Holding Fixture Mauser Receiver Fixture, dependable & durable rifle bench & vise blocks by Brownells, MPN 080-919-000. Distributor item Nr: 080919000-080919000-11266.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Brownells Ar 15/M16 Lower Receiver Vise Block Action Block & Lower Vise Block Set by Brownells in US
|
 Copyright © PrizeGunParts.com : 1997 - 2026 : All rights reserved. 140-UNI
|
|
